Made in China

These are packs of six synthetic lucky rabbit foot keychains to share with your friends. These are NOT real rabbit feet. They are made of polyester. The packs contain the following colors: pink, purple, red, green, baby blue, and white. The fake rabbit feet are 2.5" to 3" long. The rabbit feet are attached by plastic caps to a gold colored chain. Please note that dye lots may vary so the color may not be consistently the same for all rabbit feet. ...

These are professionally prepared skeleton mounts. Each skeleton is cleaned and articulated in a natural posture on a wooden base with a removable clear acrylic cover. This is a skeleton of the Asian common toad. The case is 5.25" long by 5.25" wide, and 3" high, including the cover. Overall, it weighs 0.67 lbs.

These goatskin plates are approximately 4 feet (1.22 meters) long and 2 feet (0.61 meter) wide. Please see the note on Sizes below.The Kidassia style skin has long, thin hair that averages 6" in length, but can range from about 4" to 8" long. These are also called Western style plates. When the Kidassia plates are sewn together, they make beautiful rugs.The goatskins we offer are a by-product of the food industry. These skins are not subject to USFWS export controls or to CITES. They are NOT...

This is the brass rattle pin used for our rattlesnake hat bands. They have two prongs for attaching the hat band to your hat. They are approximately 1 1/8" long by 1/4" wide.This is coated brass over base metal. Do NOT solder. They will melt.

Before ordering a hat, please use a measuring tape to measure the size of your head where the hat will sit to reduce the chance of getting the wrong size. Click HERE for a headwear conversion chart. If the hat does not fit or you wish to return it for any reason within five days of receipt, please call or send us an e-mail to let us know there is a problem. Upon receipt of the hat in its original condition, we will issue a refund for the value of the hat or exchange it for one that is smaller...

We stock a number of different designs and sizes of polyester flags.

The imitation leather laces are approximately 39" long and 1/8" wide.Metric Conversion:1/8" = 3 mm39" = 99 cm

These Hiawatha Belt (also known as Wampum Belt or Iroquois Confederacy) pins are approximately 1" wide and 0.5" high.

Consistent in length and thickness, this is a good plastic imitation of our real bone hairpipe. They are a creamy off-white color, similar to bone. They are not pure white. Weight per box of 100: 0.5" is 2.2 oz.

We offer a selection of 9mm plastic crow beads. There are approximately 1,000 beads per bag. Each bag weighs approximately 249 grams or 8.7 ounces.

These wood craft construction kits come in an array of designs. They can be painted or left natural. The 2-in-1 kits have two dinosaurs in different poses.

These wood craft construction kits come in an array of designs. They can be painted or left natural. The 2-in-1 kits have two dinosaurs in different poses.

These lucky rabbit foot key chains are available in dyed colors only. These are NOT real rabbit feet. They are made of polyester. The rabbit feet are 2.5" to 3" long. The rabbit feet are attached by plastic caps to a gold colored chain. Please note that dye lots may vary so the color may not be consistently the same for all rabbit feet. Orders for quantities more than 24 must be by the dozen. No mixing and matching different colors for quantity pricing under 24. ...

Consistent in length and thickness, this is a good plastic imitation of our real bone hairpipe. Weight per box of 100: 1" is 4.5 oz.

These black earring cards are sold in packs of 12.  Each card has one set of holes for a pair of earrings and measures 1.2" (30 mm) long by 1.4" (35 mm) wide. There are no export controls for this item.

These are 20 mm gold jingle bells. This size is sold in bags of 100 bells. Please note the price is per bell. You must buy in multiples of 100 bells.

These abalone shell buttons are made from Brown Lip Australian abalone shells. They have an old-fashioned ridged look on the back of the button and are smooth on the front. They are about 1/16" in thickness. When exported from the USA, abalone shells are subject to USFWS and require an export permit. These buttons are made from shells that are a by-product of the food industry.

Ideal for turning raccoon, fox or other tails into fancy keychains. These nickel color keychains come with 0.59" by 0.2" fur clasps attached.

This amazing bird will balance on almost anything! CPSIA approved. They are fun and educational - great for teaching kids the principles of gravity and center of mass. Individually carded on peggable color paperboard, each bird is 3.5" long from beak to tail and 1" tall with a 6.5" wingspan.

Each kit comes with instructions and is ready to assemble and paint. (Paint not included.)You can click on the name of the product for more information or just scroll down to browse the selection.Shown here unassembled, the Catapult Kit will throw a ping pong ball 20 feet or more!

These hats are made from 100% merino wool -- no blends.  These merino hats will keep you warm all winter long. They are available in various colors and are one size fits most (see the model in the photo).  They are available in Adult size only and measures approximately 11" long by 5.5" wide.

These full-grain deerskin gloves are lined with a 40g Thinsulate™ lining that is very soft and comfortable. They have a soft, rich feel and they are incredibly strong, yet flexible. Even if you get them wet, they will dry to their original softness. The ladies' gloves are narrower with shorter fingers than the men's gloves.All shipments outside of the U.S. require U.S. Fish and Wildlife export clearance.Made in China using deerskin from the USA

These fox tail keychains are made of faux fur. They are NOT real fox tails. The imitation fox tails, not including keychains, are approximately 10" long by 2.5" wide. Sizes may vary a bit. The keychain is 4" long. One fox tail keychain weighs 1.7 ounces (47 grams). No export restrictions.

These reproduction (i.e., not real) hawk skulls are some of the best quality on the market today. They are made using plastic resin and are then hand painted. These are about 2" long. Please do not call us trying to buy or sell real hawk skulls.