Findings

The thickness of the slim hairpipe falls somewhere in between the regular and ultra thin hairpipe. It is ideal for use in making bracelets and chokers with a more delicate look. The following measurements are approximate. The hairpipe is handmade so there will be some variation within each size. Length (inches) Middle Width (mm) End Width (mm) Weight of box of 100 0.5"5.8 5.8 1.8 oz. 1.0" 4.8 4.6 - 5.2 2.7 oz. 1.5" 5.7 5.0 - 5.1 4.8 oz. To make antiqued bone hairpipe, just put the hairpipe in...

Ultra thin hairpipe is around 60% to 70% of the thickness of the regular hairpipe. It is ideal for use in making bracelets and chokers with a more delicate look. The following measurements are approximate. The hairpipe is handmade so there will be some variation within each size. Length (inches) Middle Width (mm) End Width (mm) Weight of box of 100 0.5" 4.1 4.1 0.7 oz. 1.0" 4.2 3.9 - 4.0 1.8 oz. 1.5" 4.8 4.0 - 4.2 2.8 oz. To make antiqued bone hairpipe, just put the hairpipe in a bowl, boil up...

Ultra thin hairpipe is around 60% to 70% of the thickness of the regular hairpipe. It is ideal for use in making bracelets and chokers with a more delicate look. The following measurements are approximate. The hairpipe is handmade so there will be some variation within each size. Length (inches) Middle Width (mm) End Width (mm) Weight of box of 100 0.5" 4.1 4.1 0.7 oz. 1.0" 4.2 3.9 - 4.0 1.8 oz. 1.5" 4.8 4.0 - 4.2 2.8 oz. To make antiqued bone hairpipe, just put the hairpipe in a bowl, boil up...

Ultra thin hairpipe is around 60% to 70% of the thickness of the regular hairpipe. It is ideal for use in making bracelets and chokers with a more delicate look. The following measurements are approximate. The hairpipe is handmade so there will be some variation within each size. Length (inches) Middle Width (mm) End Width (mm) Weight of box of 100 0.5" 4.1 4.1 0.7 oz. 1.0" 4.2 3.9 - 4.0 1.8 oz. 1.5" 4.8 4.0 - 4.2 2.8 oz. To make antiqued bone hairpipe, just put the hairpipe in a bowl, boil up...

These bone shapes are ideal for use in making necklaces with your own designs. They can be carved or painted.The bone rectangle is 1 5/8" long, 1" wide, and approximately 1/4" thick.domesticated water buffalo are not endangered.

These bone shapes are ideal for use in making scrimshaw projects with your own designs. They can be carved or painted. The bone slab is approximately 3 1/8" long, 1 1/8" wide, 1/8" thick in the middle, and 1/4" thick along the sides. In metric, this is approximately 7.94 cm long by 2.86 cm wide by 0.32 cm thick in the middle and 0.64 cm thick on the edges. Each slab weighs approximately 0.78 ounces or 22 grams. Domesticated water buffalo are not endangered. ...

These bone slabs can be used for scrimshaw or inlay. These bone shapes are ideal for use in making scrimshaw projects with your own designs. They can be carved or painted. You will not receive the exact pieces shown in the photos but ones similar. There is some variation from piece to piece as these are all hand carved. The bone slabs are approximately 3" long, 1" wide, 1/8" thick in the middle, and 3/8" thick along the sides. In metric, this is approximately 7.62 cm long by 2.54 cm wide by...

These bone shapes are ideal for use in making necklaces with your own designs. They can be carved or painted.The rounded bone slab with hole is 3" long, 1" wide, and approximately 0.25" thick. Domesticated water buffalo are not endangered.

These flat bone slabs can be used for scrimshaw or inlay. These bone shapes are ideal for use in making scrimshaw projects with your own designs. They can be carved or painted. You will not receive the exact pieces shown in the photos but ones similar. There is some minor variation from piece to piece as these are all hand carved. The flat bone slabs are approximately 3" long, 1" wide, and 1/8" thick. In metric, this is approximately 7.62 cm long by 2.54 cm wide by 0.32 cm thick....

These bone shapes are ideal for use in making scrimshaw projects with your own designs. They can be carved or painted. These bone slabs are thinner than our regular bone slabs.  They are approximately 3" long, 1 1/8" wide, and 0.02" to 0.12" in the middle, and 1/8" thick along the sides. In metric, this is approximately 7.62 cm long by 2.86 cm wide by 0.5 mm to 3 mm thick in the middle and 0.32 cm thick on the edges. Each slab weighs approximately 0.78 ounces...

The bone spacers are used for making Native American bracelets and chokers with multiple rows. The spacers are sold in boxes of 100.Domesticated water buffalo are not endangered.

The bone spacers are used for making Native American bracelets and chokers with multiple rows. The spacers are sold in boxes of 100. Domesticated water buffalo are not endangered.

The bone spacers are used for making Native American bracelets and chokers with multiple rows. The spacers are sold in boxes of 100. Domesticated water buffalo are not endangered.

The bone spacers are used for making Native American bracelets and chokers with multiple rows. The spacers are sold in boxes of 100.This size was imported directly from Vietnam so that is why the prices are lower. The other sizes were purchased from a local supplier. Domesticated water buffalo are not endangered.

The bone spacers are used for making Native American bracelets and chokers with multiple rows. The spacers are sold in boxes of 100. Domesticated water buffalo are not endangered.

These shell buttons are made from brown oyster. The buttons have two holes.When exported from the USA, these buttons are subject to USFWS inspection.Made in South Korea from Australian Shells