Product of USA

These fly fishing kits were developed for the beginner fly tyer. All kits come with a step-by-step instructional handbook that teaches the fundamental techniques of fly tying each of the patterns listed below.The Starter Kit includes the tools and materials to tie the following 10 fly patterns: Wooly Bugger, All Purpose Nymph, San Juan Worm, Stretch Tubing Scud, Foam Beatle, Poly Caddis, Brassie, Bead Head Caddis Larva, Fur Ant, and Inchworm. The kit is 12.5" x 9.5" and weighs 2 lbs. ...

These fly fishing kits were developed for the beginner fly tyer. All kits come with a step-by-step instructional handbook that teaches the fundamental techniques of fly tying each of the patterns listed below.The Starter Kit Materials Only includes all of the materials found in the Starter Kit to tie the flies but does not include the tools. The kit is 12.5" x 9.5" and weighs 0.94 lbs.

These are assorted fossil bison leg bones. These average 13.5" to 15" long by 2" wide, and weigh about 2.34 lbs. There will be variation from leg bone to leg bone. There are no export controls for this item.

These are assorted fossil bison toe bones. These average 7.5" to 9.5" long by 1" to 2" wide, and weighs about 8.4 oz (240 grams). There will be variation from toe bone to toe bone. There are no export controls for this item.

These are assorted fossil bison rib bones. These average 23" to 26" long along the curve, and 1" wide. They weigh about 0.52 pounds each. There will be variation from rib to rib. There are no export controls for this item.

This fossil calf skull was found along the banks of the Mississippi River.

These real sled dog or wolf fossil teeth come packaged with a descriptive card There are no export controls on fossilized sled dog/wolf canines.

These are real fossil Trilobites of the species Elrathia kingi from Utah. They are approximately 0.75" long and 0.50" wide. Each weight about 1 to 3 grams.

The Fossil Walrus Cheek Plates measure approximately 9" (23 cm) in length and 6" (15 cm) in width.This material was legally harvested on St. Lawrence Island in Alaska. There are no export restrictions on fossil walrus ivory products. We no longer ship fossil walrus products to Germany as we had a shipment of fossil walrus cheek plates siezed and destroyed by German customs in December 2013. Germany requires a USFWS export permit for these items, however, we have been informed by U.S. Fish &...

The fossilized walrus ivory tusk pieces are sold by the piece.This material was legally harvested on St. Lawrence Island in Alaska. It was purchased in the village of Savoonga from Amelia Kingeekuk during a trip to the Bering Sea in February 2007. These are very nice, solid pieces for carving or collecting. There are no export restrictions on fossil walrus ivory products. Note: We no longer ship fossil walrus products to Germany as we had a shipment of fossil walrus cheek plates siezed and...

The fossilized walrus ivory tusk pieces are sold by the piece.This material was legally harvested on St. Lawrence Island in Alaska. It was purchased in the village of Savoonga from Amelia Kingeekuk during a trip to the Bering Sea in February 2007. These are very nice, solid pieces for carving or collecting. There are no export restrictions on fossil walrus ivory products. Note: We no longer ship fossil walrus products to Germany as we had a shipment of fossil walrus cheek plates siezed and...

The fossilized walrus ivory tusk pieces are sold by the piece.This material was legally harvested on St. Lawrence Island in Alaska. It was purchased in the village of Savoonga from Amelia Kingeekuk during a trip to the Bering Sea in February 2007. These are very nice, solid pieces for carving or collecting. There are no export restrictions on fossil walrus ivory products. Note: We no longer ship fossil walrus products to Germany as we had a shipment of fossil walrus cheek plates siezed and...

These polished fossilized whale ear bones are from the Pliocene, South Carolina. Fossils are not subject to CITES or USFWS controls.

These polished fossilized whale ear bones are from the Pliocene, South Carolina. Fossils are not subject to CITES or USFWS controls.

These are real longnose gar skulls.  They are also known as needlenose gar. They have been cleaned and include the lower jaw. The upper and lower jaws may be separate or glued together. These skulls are approximately 9.5" to 12.25" long by 1.5" to 2.5" wide by 1" to 2" tall.  The skulls weigh about 1.8 to 3 ounces. Longnose gar are not endangered or subject to CITES. A USFWS export permit is required for all shipments outside the USA. ...

This hide did not fit into our stock colors so we are selling it by the hide as a gallery item. It is a good quality hide. This is TOPGRAIN deerskin leather--often called Buckskin as well. It has a smooth side (skin side) and a rough side (suede side). We sell deerskin leather by the full hide. The White Tail Deer hides vary in size from about 8 square feet to 13 square feet. Each hide is marked with its size.

This is TOPGRAIN deerskin leather--often called Buckskin as well. It has a smooth side (skin side) and a rough side (suede side). We sell deerskin leather by the full hide. The White Tail Deer hides vary in size from about 8 square feet to 13 square feet. Each hide is marked with its size. We can usually select either small, medium, or large hides according to your wishes. We will not, however, cut hides to measure or select just the best hides. No returns on cut hide.

This is TOPGRAIN deerskin leather--often called Buckskin as well. It has a smooth side (skin side) and a rough side (suede side). We sell deerskin leather by the full hide. The White Tail Deer hides vary in size from about 8 square feet to 13 square feet. Each hide is marked with its size. We can usually select either small, medium, or large hides according to your wishes. We will not, however, cut hides to measure or select just the best hides. No returns on cut hide.

This is TOPGRAIN deerskin leather--often called Buckskin as well. It has a smooth side (skin side) and a rough side (suede side). We sell deerskin leather by the full hide. The White Tail Deer hides vary in size from about 8 square feet to 13 square feet. Each hide is marked with its size. We can usually select either small, medium, or large hides according to your wishes. We will not, however, cut hides to measure or select just the best hides. No returns on cut hide.

This is TOPGRAIN deerskin leather--often called Buckskin as well. It has a smooth side (skin side) and a rough side (suede side). We sell deerskin leather by the full hide. The White Tail Deer hides vary in size from about 8 square feet to 13 square feet. Each hide is marked with its size. We can usually select either small, medium, or large hides according to your wishes. We will not, however, cut hides to measure or select just the best hides. No returns on cut hide.

This is TOPGRAIN deerskin leather--often called Buckskin as well. It has a smooth side (skin side) and a rough side (suede side). We sell deerskin leather by the full hide. The White Tail Deer hides vary in size from about 8 square feet to 13 square feet. Each hide is marked with its size. We can usually select either small, medium, or large hides according to your wishes. We will not, however, cut hides to measure or select just the best hides. No returns on cut hide.

This is TOPGRAIN deerskin leather--often called Buckskin as well. It has a smooth side (skin side) and a rough side (suede side). We sell deerskin leather by the full hide. The White Tail Deer hides vary in size from about 8 square feet to 13 square feet. Each hide is marked with its size. We can usually select either small, medium, or large hides according to your wishes. We will not, however, cut hides to measure or select just the best hides. No returns on cut hide.

These are cleaned goat horn cores measuring approximately less than 4" from horn core tip to base along the outside curve. They can be used for craft projects. The horns do have some variety in them. You will not receive the exact horn from the photos but something similar. These goat horn cores are not subject to USFWS export controls and are NOT endangered.

These are cleaned goat horn cores measuring approximately 10" to 12" from horn core tip to base along the outside curve. They can be used for craft projects. The horns do have some variety in them. You will not receive the exact horn from the photos but something similar. These goat horn cores are not subject to USFWS export controls and are NOT endangered.