Made in the USA

This 4-pack acrylic leather paint set includes 2-ounce bottles of four primary colors: red, yellow, blue, and green.These Realeather acrylic paints are an alternative paint product for the leatherwork and crafting industry.Some key product details:No pre-treatment or finish is necessary to obtain a rich, deep color.Ideal for both accent details and full coverage projects.Quick drying and waterproof once fully dry.A wide variety of colors and ability to easily blend allows for easy creation of...

This cane is made with a real rattlesnake head and skins. The head is open-mouthed and the skin is coated in resin. Please note: The snakes are rounded up each year as they are a physical danger to both the public and livestock. They are humanely killed and everything is used: the venom goes to making anti-venom; the meat is eaten; the hides are used for leather to make wallets, hats, boots; and the heads and tails are used for crafts, jewelry, and decoration. As long as people insist on...

The Deertan leather is 3 to 4 oz. cowhide leather that is tanned soft like deer. They measure 9" by 3". Cows are not an endangered species. The leather is a by-product of the food industry. The cows are not killed just for the skin.

These REAL Coyote Canine Necklaces are made using antiqued brass beads and a 32" deerskin neck strap. These necklaces are NOT Native-made.A USFWS export permit is required for all shipments outside the USA.

This imitation sinew is flat and waxed 100% polypropylene with a 70-pound test strength. It is about 1/8" wide and can easily be split like real sinew into four pieces. It is ideal for craft projects such as stitching hides, jewelry, crafts, basket weaving, dream catchers, and more. The rolls weigh approximately 1 pound. Please note that some customers find these waxy, but that is the way they come. In addition, if you purchase multiple rolls you may find that one roll is thicker or thinner...

These REAL Bear Claw necklaces hang on a 32" leather strap, with one of our Real Hair-On Black Bear Claws. These are mostly made using the rear bear claws.Black bear around the world are considered to be a threatened species. The trade in products from these animals is regulated to ensure that the bears do not face extinction. Black bear are no longer found in some areas, but are quite plentiful in Canada. In fact, according to the Globe & Mail, more than 100,000 black bears are thought to...

We offer a range of puzzles with nature and Native American themes. These will be discontinued when our stock is sold out.

These are quality deerskin leather laces. We currently offer them in nine colors on 50' spools. The laces come in two widths: 1/8" and 3/16". The 1/8" lacing is approximately 1.5 mm to 2 mm (0.06" to 0.08") thick. The lacing on each roll is continuous - i.e., they are spliced in the factory to produce a continuous length. These laces are tanned then dyed. They come from different dye lots so there will be some variation in color. Also expect some variation in width as deerskin is very hard to...

These are real bullets mounted to key rings.Length: 2.75"Width: 0.5"Weight: 0.4 oz.Bullet keychains cannot be taken aboard an airplane in your carry on bag. They generally can be packed in checked luggage. It is best to notify the airline personnel at check in.There is no gunpowder and they are not “live” bullets.

These mining equipments are in good condition. We are not sure if the Geiger counters work fully and so are for decoration only.

These mitts were made by our friend Lenny using real American skunk skins. They are unisex and one-size-fits-most. They were made for an average hand. If you have particularly small hands or really large ones, they are probably not for you. We use real leather for the palms and sheepskin shearling for the lining. Skunks are not an endangered species and are not subject to CITES controls. A USFWS export permit is required for all exports outside of the U.S.

These round 10-ply maple drum frames are approximately 14" by 2 7/8". Actual Measurements:Length: 13 7/8"Width: 2 7/8"Thickness: 2/8"Weight: 10 ounces (281 grams)

These REAL Badger Claw Necklaces are made using antiqued brass beads and a 32" deerskin neck strap. Badger are not an endangered species. A U.S. Fish & Wildlife export permit is needed for all shipments outside the United States. Not for sale in the following states: Indiana. These necklaces are NOT Native-made.

This real badger claw necklace is made using antiqued brass beads and a 32" deerskin neck strap. Badger are not an endangered species. A U.S. Fish & Wildlife export permit is needed for all shipments outside the United States. Not for sale in the following states: Indiana. This necklace is NOT Native-made.

Each one pound bag contains 5 to 7 oz. latigo lace scrap in earth tones (e.g., beiges, creams, blacks, browns, tans). The lace varies in width and length. Cows are not an endangered species. The leather is a by-product of the food industry. The cows are not killed just for the skin.

This imitation sinew is flat and waxed 100% polyester with a 70-pound test strength. It is about 1/8" wide and can easily be split like real sinew into four pieces. It is ideal for craft projects such as stitching hides, jewelry, crafts, basket weaving, dream catchers, and more. The rolls weigh approximately 1 pound. Please note that some customers find these waxy, but that is the way they come. In addition, if you purchase multiple rolls you may find that one roll is thicker or thinner than...

This 5-ply round imitation sinew comes in 1 oz. rolls of 28 yards. This imitation sinew is waxed with brown wax. 100% polyester with a 60 lb. break test strength. It is ideal for craft projects such as stitching hides, jewelry, crafts, basket weaving, dream catchers, and more. There are no export controls for this item.

These are quality deerskin leather laces. We currently offer them in nine colors on 50' spools. The laces come in two widths: 1/8" and 3/16". The 1/8" lacing is approximately 1.5 mm to 2 mm (0.06" to 0.08") thick. The lacing on each roll is continuous - i.e., they are spliced in the factory to produce a continuous length. These laces are tanned then dyed. They come from different dye lots so there will be some variation in color. Also expect some variation in width as deerskin is very hard to...

This single end imitation sinew comes in 1 oz. rolls of 118 yards. It is approximately 1/16" wide. This imitation sinew is waxed. 100% polypropylene with a 17 lb. break test strength. It is ideal for craft projects such as stitching hides, jewelry, crafts, basket weaving, dream catchers, and more. There are no export controls for this item.

These are genuine leather hat bands made with real rattlesnake skin, perfect for decorating those leather hats! The 1" wide hat band is stitched with real rattlesnake skin on the outside and has a replica buffalo nickel on the front and a brass coated metal rattle pin and real rattle on the end. The hat band is 27" long. The hat band weighs 50 grams. There will be slight variations in color and pattern as these are made from natural products. Texas Western diamondback rattlesnakes are not...

This 2-ply round twine comes in 2 oz. rolls of 660 feet or 220 yards. This twine is waxed. 100% polyester. It is ideal for craft projects such as stitching hides, jewelry, crafts, basket weaving, dream catchers, and more. There are no export controls for this item.

These Davy Crockett Hats are made from faux fur and have a real raccoon tail. The hats are gray with raccoon tails that look like Crystal fox tails (i.e., very light brown blond in color). These hats are not lined. We have several styles of available. Before ordering a hat, please use a measuring tape to measure the size of your head where the hat will sit to reduce the chance of getting the wrong size. Please see the Hat Size Chart tab for the conversion chart. If the hat does not fit or you...

This is bleached raw beaver hair sold by the pound. The beaver skin is bleached first and then the hair is cut off. It is a mix of underfur and guard hairs. We recommend this item for the fly tie market.Beaver are not an endangered species.A USFWS export permit is required for all shipments outside the USA.

These reproduction (i.e., not real) elk teeth are some of the best quality on the market today. They are made using casts from real elk ivories using plastic resin and are then hand painted. The teeth are 1.25" long.