Products 1-16 of 90
Show
Code: 15-4A14-G04
In Stock
Availability: In Stock
Product of the USA
Item #: 15-4A14-G04 -
These are professionally cleaned alligator skulls from a variety of sources in Louisiana and Florida. The alligator skulls from larger alligators are typically hunted during statewide hunts.Alligators, crocodiles, and caiman are endangered in most areas in the wild. In the US, alligators in the wild are protected under the U.S. Endangered Species Act. The State of Louisiana has occasional licensed hunts in the wild to reduce the number of alligators. Chichester is licensed by the New York...
Code: 15-4A14-G14 (K8)
In Stock
Availability: In Stock
Product of the USA
Item #: 15-4A14-G14 (K8) -
These are professionally cleaned alligator skulls from a variety of sources in Louisiana and Florida. The alligator skulls from larger alligators are typically hunted during statewide hunts.Alligators, crocodiles, and caiman are endangered in most areas in the wild. In the US, alligators in the wild are protected under the U.S. Endangered Species Act. The State of Louisiana has occasional licensed hunts in the wild to reduce the number of alligators. Chichester is licensed by the New York...
Code: 15-205-A (B4)
In Stock
Availability: In Stock
Product of the USA
Item #: 15-205-A (B4) -
These skulls have been professionally cleaned and prepared. They come with the teeth and lower jaw. They average around 5" (12.5 cm) long, 2.5 - 3" (6.5 - 7.5 cm) tall, and 3" (7.5 cm) wide. They weigh about 2 oz. (58 grams).A USFWS export permit is required for all shipments outside of the U.S.
Code: 15-202 (B)
In Stock
Availability: In Stock
Product of the USA
Item #: 15-202 (B) -
These skulls have been professionally cleaned and prepared. They include the teeth and the lower jaw.Length: 5" (12.5 cm)Highest point: 4.75" (12 cm)Widest point: 4" (10 cm)A USFWS export permit is required for all shipments outside of the U.S.
Code: 15-248-G04 (Y2P)
In Stock
Availability: In Stock
Product of SOUTH AFRICA
Item #: 15-248-G04 (Y2P) -
These are real African wildebeest skulls with horns. Some may only have the skull plate while others have the whole skull with the horns. They may not have lower jaws.Blue and black wildebeest are not an endangered species and are not subject to CITES controls.A USFWS export permit is required for all shipments outside the USA.
Code: 15-219 (F8)
Out of Stock
Availability: Out of Stock
Product of the USA
Item #: 15-219 (F8) -
We usually have a limited number of professionally cleaned bobcat skulls for sale at any time.The size averages 6" (15 cm) long, 4" (10 cm) wide, and 3.5" (9 cm) tall.Bobcat are subject to CITES and are not for export without a CITES permit. Not for sale in California.
Code: 15-225-AS (10UB2)
Out of Stock
Availability: Out of Stock
Product of the USA
Item #: 15-225-AS (10UB2) -
These are professionally cleaned buffalo skulls with horn caps. The horn caps are removable.The skulls are a by-product of buffalo that were ranch raised for meat. The animals were not killed just for their skulls.A USFWS export permit is required for all shipments outside the USA.
Code: 15-225-G2302 (10UB)
In Stock
Availability: In Stock
Product of the USA
Item #: 15-225-G2302 (10UB) -
These are professionally cleaned buffalo skulls with horn caps. The horn caps are removable.The skulls are a by-product of buffalo that were ranch raised for meat. The animals were not killed just for their skulls.A USFWS export permit is required for all shipments outside the USA.
Code: 15-235 (O5)
In Stock
Availability: In Stock
Product of CHINA
Item #: 15-235 (O5) -
We have a selection of domesticated house cat skulls. One skull measured randomly was 4" long, 3" wide, and 2" high. The cats were not killed just for their skulls. Felis catus are not subject to CITES or USFWS controls.
Code: 15-253-13 (V1)
In Stock
Availability: In Stock
Product of INDONESIA
Item #: 15-253-13 (V1) -
These are cleaned bat skulls. The cave nectar bat is also known as the dawn bat, common dawn bat, common nectar bat, and lesser dawn bat. Length: 1.50" Width: 0.75" Weight: 0.03 oz (1.25 gram) These bats are not endangered and are not subject to CITES controls. For sale in the USA only. Not for export.
Code: 15-305 (F9)
Out of Stock
Availability: Out of Stock
Product of the USA
Item #: 15-305 (F9) -
These are real chicken skulls. They measure approximately 3" long, 1.25" wide, and 1.5" high. They weigh approximately 0.1 oz.There are no export controls for this item.
Code: 15-226-G17 (L32)
In Stock
Availability: In Stock
Product of the USA
Item #: 15-226-G17 (L32) -
The cow skulls have been cleaned and do not have lower jaws. They average 20" long and 8" wide. "Muley" means naturally hornless. Cows are not an endangered species. These skulls are a by-product of the meat industry. The animals were not killed just for their skulls. We cannot ship cow skulls to Canada because of concerns over BSE (Bovine Spongiform Encephalopathy).
Code: 15-226-G18 (K15)
In Stock
Availability: In Stock
Product of the USA
Item #: 15-226-G18 (K15) -
The cow skulls have been cleaned and do not have lower jaws. They average 20" long and 8" wide. "Muley" means naturally hornless. Cows are not an endangered species. These skulls are a by-product of the meat industry. The animals were not killed just for their skulls. We cannot ship cow skulls to Canada because of concerns over BSE (Bovine Spongiform Encephalopathy).
Code: 15-204-1 (B)
In Stock
Availability: In Stock
Product of the USA
Item #: 15-204-1 (B) -
These coyote skulls have been professionally cleaned and prepared. They come with the teeth and lower jaw. They are sorted into #1 skulls, which have no breaks or holes, and #2 skulls, which have broken pieces and may have holes.We measured a skull to be 8" (20.5 cm) long, and 4.5" (11.5 cm) wide. The highest point of the skulls range between 3.5 - 4" (9 - 10 cm).
Code: 15-204-2 (D7)
In Stock
Availability: In Stock
Product of the USA
Item #: 15-204-2 (D7) -
These coyote skulls have been professionally cleaned and prepared. They come with the teeth and lower jaw. They are sorted into #1 skulls, which have no breaks or holes, and #2 skulls, which have broken pieces and may have holes. We measured a skull to be 8" (20.5 cm) long, and 4.5" (11.5 cm) wide. The highest point of the skulls range between 3.5 - 4" (9 - 10 cm).
Code: 15-244-N-AS (10UBW)
Out of Stock
Availability: Out of Stock
Product of the USA
Item #: 15-244-N-AS (10UBW) -
These are white tail deer skulls with no antlers. They have been cleaned. The lower jaw is not glued to the skull. White tail deer are not an endangered species and are not subject to CITES controls. A USFWS export permit is required for all shipments outside the USA. Not for sale in most southeastern states due to state regulations. It was confirmed by USFWS on October 15, 2015 that it is okay to sell white tail deer antler to California because the species is not native to that state. ...