Made in USA

These earrings are made with real rattlesnake fangs from Texas Diamondback Rattlesnakes and silver-tone surgical steel mounts. These are approximately 1.5" long. Please note that the fangs are not sprayed or treated with anything. They are naturally shiny. None of our rattlesnake products come from California or Oregon. Texas Western diamondback rattlesnakes are not endangered. A U.S. Fish & Wildlife permit is required for shipments outside of the United States. ...

These guitar straps are made from genuine rattlesnake skins. The pattern of the rattlesnake skins will vary so each strap will look different.  The straps are approximately 47" long by 2.5" wide and weigh 0.4 pounds. Texas Western diamondback rattlesnakes are not endangered and are not subject to CITES controls. None of our rattlesnake products come from California or Oregon. A U.S. Fish & Wildlife permit is required for shipments outside of the United States. ...

These leather wallets have real Texas Western diamondback rattlesnake skin on the outside and cow leather on the inside. The cardholder style has a slim profile with 3 card slots, 1 deeper slot that could be used for an additional card or folded cash, and an ID window slot. The wallet measures 4" long by 3" wide and 0.25" thick (empty). There are slight variations in each piece as these are made from natural items. Care Instructions: The rattlesnake card holders are tanned using an oil-based...

These cross keychains are made using real Texas Western diamondback rattlesnake skins. The rattlesnake skin is mounted on a black leather cross shape measuring 3.5" long by 2.75" wide and attached to a silver colored keyring. The keychain weighs 9 grams.None of our rattlesnake products come from California or Oregon. Texas Western diamondback rattlesnakes are not endangered and are not subject to CITES controls. Not for export outside of the United States. ...

These leather wallets have real rattlesnake skin on the outside and cow leather on the inside. The closed wallet measures 4.5" long by 3.5" wide and 0.5" thick. It measures 9" long when fully open. It weighs 2.9 ounces.There are slight variations in the colors and patterns of each wallet because rattlesnake skins are natural products. Texas Western diamondback rattlesnakes are not endangered and are not subject to CITES controls. None of our rattlesnake products come from California or Oregon....

These leather wallets have real rattlesnake skin on the outside and cow leather on the inside. The trifold style has 6 card slots, 1 ID window, and a bill compartment. The closed wallet measures 4" long by 3.25" to 3.5" wide and 0.75" thick. It measures 9.25" long when fully open. It weighs 71 grams. There are slight variations in the colors and patterns of each wallet because rattlesnake skins are natural products. Texas Western diamondback rattlesnakes are not endangered and are not subject...

These leather wallets have real rattlesnake skin on the outside and cow leather on the inside. The trucker style wallet has a 2-button snap closure, and includes a 17" chain, 2 long pocket slots, and an inner zip pocket. The wallet measures 8" long, 4.25" wide and 0.75" thick when empty. It weighs about 8 oz. There are slight variations in the colors and patterns of each wallet because rattlesnake skins are natural products. Texas Western diamondback rattlesnakes are not endangered and are not...

These earrings are made with real rattlesnake vertebrae from Texas Diamondback Rattlesnakes. The vertebrae are approximately 1" long and the total length of the earrings are approximately 2" long. Since these are made with natural products, there will be variation in the vertebrae from earring to earring. None of our rattlesnake products come from California or Oregon. Texas Western diamondback rattlesnakes are not endangered. A U.S. Fish & Wildlife permit is required for shipments outside of...

These wristbands are made with real rattlesnake skins from Texas Western diamondback rattlesnakes. The outside is rattlesnake and the inside is a cow leather backing. There will be slight variations in each piece as these are natural, not manufactured, items. These wristbands are 10" long by 1.25" wide. The snap tends to be about 0.5" from the edge so if the circumference of your wrist is 9.5" or more, please don't buy this size. None of our rattlesnake products come from California or Oregon....

These wristbands are made with real rattlesnake skins from Texas Western diamondback rattlesnakes. There will be slight variations in each piece as these are natural, not manufactured, items.  These wristbands are 8" long by 1.25" wide. The snap tends to be about 0.5" from the edge so if the circumference of your wrist is more than 7.5" this will probably be too tight. We recommend going up a size. None of our rattlesnake products come from California or Oregon. Texas Western diamondback...

These wristbands are made with real rattlesnake skins from Texas Western diamondback rattlesnakes. The outside is rattlesnake and the inside is a cow leather backing. There will be slight variations in each piece as these are natural, not manufactured, items. These wristbands are 9" long by 1.25" wide. The snap tends to be about 0.5" from the edge so if the circumference of your wrist is more than 8.5" this will probably be too tight. We recommend going up a size. None of our rattlesnake...

These are real skunk fur hats in different sizes.Before ordering a hat, please use a measuring tape to measure the size of your head where the hat will sit to reduce the chance of getting the wrong size. Please see the Hat Size Chart tab for the conversion chart. If the hat does not fit or you wish to return it for any reason within five days of receipt, please call or send us an e-mail to let us know there is a problem. Upon receipt of the hat in its original condition, we will issue a refund...

These hats are made using real skunk fur. They are lined and have a face. These hats are a custom order item at this time. We will need to know your head size in order to make a hat that fits properly. Each skunk hat takes at least two skunk skins. Please allow four weeks for delivery.We also stocked these hats in Canada for delivery to Canadian and international customers.Weight: 2.7 oz. (KS, KM); 3.0 oz. (KL, AS)Before ordering a hat, please use a measuring tape to measure the size of your...

The real water buffalo tooth necklaces come on a 32" leather strap and are decorated with glass beads. A USFWS export permit is required for all shipments outside the USA.

The real water buffalo tooth necklaces come on a 32" leather strap and are decorated with glass beads. A USFWS export permit is required for all shipments outside the USA.

The real water buffalo tooth necklaces come on a 32" leather strap and are decorated with glass beads. A USFWS export permit is required for all shipments outside the USA.

These realistic bear tooth pendants look so real that they have even fooled conservation officers! The bear canines are made from quality plastic resin and are hand-painted in the USA. They come on a 32" deerskin neck strap. The 1-tooth necklaces have a glass crow bead. These necklaces are NOT Native-made. A USFWS export permit is required for all shipments outside the USA.

These realistic bear tooth pendants look so real that they have even fooled conservation officers! The bear canines are made from quality plastic resin and are hand-painted in the USA. They come on a 32" deerskin neck strap. The multi-tooth necklaces have brass beads. These necklaces are NOT Native-made. A USFWS export permit is required for all shipments outside the USA.

These reproduction (i.e., not real) double eagle claw talismans are some of the best quality on the market today. They are made using plastic resin and are then hand painted. They are 2.5" wide.Please note: We are not interested in buying or selling real eagle parts.

These are 1-claw realistic grizzly bear claw necklaces. These realistic claw pendants look so real that they have even fooled conservation officers! The grizzly claws are made from quality plastic resin and are hand-painted in the USA. They come on a 32" deerskin neck strap. The 1-claw necklaces have a glass crow bead. The claws measure approximately 5" along the outside curve. These necklaces are NOT Native-made. A U.S. Fish & Wildlife export permit is needed for all shipments outside the...

These are 3-claw realistic grizzly bear claw necklaces. These realistic claw pendants look so real that they have even fooled conservation officers! The grizzly claws are made from quality plastic resin and are hand-painted in the USA. They come on a 32" deerskin neck strap. The multi-claw necklaces have oxidized (antiqued) brass beads. The claws measure approximately 5" along the outside curve. These necklaces are NOT Native-made. A U.S. Fish & Wildlife export permit is needed for all...

These reproduction (i.e., not real) plains grizzly bear claws are some of the best quality on the market today. They are made using casts from real claws using plastic resin and are then hand painted. We often encounter people who insist that these are real claws--they have even fooled conservation officers. They measure approximately 5" along the outside curve.

These plastic lion claws were cast from a real lion claw. They are approximately 4" long measured along the outside curve and 2" wide across the top. One claw weighs about 11 grams or 0.4 ounce.

These reproduction (i.e., not real) small turtle shells are some of the best quality on the market today. They are made using plastic resin and are then hand painted. They measure 1 3/8" by 1 1/4".